High levels of performance, long term reliability, and multiple operating configurations.
INNOVA 90C Features:
|Beam Diameter (@ 1/e2 points)3||
|Beam Divergence (full angle)||
|Beam Waist Diameter4||
|Beam Waist Location4||
|1.16 m||1.16 m|
|1.14 m||1.14 m|
|Long Term Power Stability5|
|+/- 0.5%||+/- 0.5%|
|+/- 3.0%||+/- 3.0%|
|Optical Noise (rms)6|
1 All powers are listed in Watts. Guaranteed power specifications for standard systems are indicated in bold print. All power specifications, except multiline visible and IR, are TEM00.
2 All beam specifications are measured at specified output powers at 514.5 nm for argon lasers and 47.1 nm for krypton lasers.
3 Beam diameter is measured at the output-coupler mirror.
4 Inside the resonator, the beam waist is located at the flat high reflector. The long-radius output coupler acts as a weak lens to transfer the output-beam parameters. The values listed for beam divergence, beam waist diameter and beam waist location take into account the weak lens effect. The value for beam waist location is measured from the output coupler toward the high reflector.
5 Maximum peak variation over any 30 minute period after a 2-hour warm-up.
6 Measured with a 10 Hz to 2 MHz photodiode driving a resistive load at
514.5 nm for argon systems and 647.1 nm for krypton systems.
Coherent has locations across the globe that are available to provide support for any product, service or inquiry.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA
Please Read Before Continuing
Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.